AM4.6

The audio master hub is capable of controlling up to 6 audio sources as well as a CCTV input, and can distribute their signals to 4 main and 4 sub-zones around the home via Cat5e cabling.

Product Details

KP4.6—frequency range 20Hz—20kHz

Each zone is controlled by a wall control panel, which is a combination amplifier/keypad with volume, bass, treble balance and fader control.

It also supports infrared control and pass-through to source equipment.

In addition it features two local inputs and allows local source selection. A 3 Colour LED indicates operational status and control functionality.

RC4.6

The system remote replicates all the functionality of the wall keypad including direct source selection, mute and all-off switching.

The source equipment can also be remote controlled from all main and sub-zones with the remote control supplied with the source equipment.

PS4.6

A 24 volt switch-mode power supply. Users will need one of these to power the 4 main zones (one power supply is also required to power the 4 sub zones).

VM4.6

The video switching unit works in conjunction with the audio hub to distribute video signals. Up to 6 video input sources and an additional CCTV input may be connected and distributed.

LKP4.6—fits in a 2” deep junction box

Can control all source equipment. Connects directly to KP4.6 with a ribbon cable (included) and can only be used in conjunction with KP4.6.

Codes are uploaded from LRC4.6 with cloning cable (included).

LRC4.6

The learning remote control can operate both the KP4.6 keypad as well as the source equipment connected to the system.

The control codes for the KP4.6 are already pre-programmed into the LRC4.6, while new control codes for the source components can be learned from their dedicated remote controls.

LM4.6—fits in a 2” deep junction box

The local module plate has input for 1 local source.

Cat5e is run from the audio master hub to the local module plate and then onto the keypad.

A second local module plate can be added to allow input from 2 local sources.

Cat5e is run from the audio master hub to the first local module plate and then to the second local module plate and then onto the keypad.

ACA-Apex Limited

Text Box: Multi Room Audio Distribution

Audio and video equipment can be centrally located and accessed throughout the home. Modular by nature and available as a kit, or customized using the components this is a truly versatile and impressive system that can be expanded up to 16 main zones and 16 sub zones.

Picture shows the AVD4.6 kit  which consists of:

1 x AM4.6 Audio Module

4 x KP4.6 Keypads

1 x RC4.6 Remote control

1 x PS4.6 24v Power Supply

and

2 x infrared emitters

 

Oval: Introduction
Oval: Product Overview
Oval: Contact Details
Oval: Data & TV Distribution
Oval: Brush Face Plates
Oval: Modules & FacePlates
Oval: Jamo Custom Audio
Oval: Infrared Control
Oval: Cabling & Accessories
Oval: Lighting/Automation
Oval: AV Racking
Oval: 19” Rack Panels
Oval: Peerless Mounts
Oval: Screen Mounts
Oval: Installer Training
Oval: Design Services
Oval: Manuals & Guides

Part numbers

Product description

 

JAMO-AVD46

A-Bus Multi Room Distribution system

 

JAMO-AM4.6

Audio Master Hub

 

JAMO-KP4.6

In-Wall Zone Controller with Infrared

 

JAMO-RC4.6

Basic Remote Control for KP4.6

 

JAMO-PS4.6

23V Main Zone Power Supply

 

JAMOVM4.6

Video Switching Unit

 

JAMO-LRC4.6

Learning Remote Control for LKP4.6

 

JAMO-LKP4.6

In-Wall Zone Controller with Learning Function

 

JAMO-LM4.6

Local Module Plate with Auxiliary Input

 

"Creating Small Networks for a Big World"